2 ton jib crane

2 ton jib crane Rental & Selection Guide

Looking for a reliable 2 ton jib crane for your site? This guide from Lift Group explains specs, mounting options, safe operation, rental vs purchase choices, and how to get on-site support quickly.

What is a 2 ton jib crane?

A 2 ton jib crane is a compact lifting solution designed to handle loads up to 2,000 kg (approx. 4,400 lb). It gives localized lifting and positioning with a pivoting arm (jib) and is ideal for workshops, light industrial bays, and maintenance areas.

Common uses

• Loading/unloading machines and parts
• Assembly line positioning
• Maintenance lifts in confined spaces
• Material handling in warehouses and yards

Key specifications to compare

When evaluating a 2 ton jib crane, check these technical details to ensure it suits your application:

• Rated capacity: 2 ton (confirm safety factor and working load limit)
• Radius / outreach: distance from base to hook at maximum reach
• Rotation: 180° to 360° depending on mount and model
• Mounting type: floor-mounted pedestal, wall-mounted, or free-standing
• Hoist type: manual, electric chain, or wire rope
• Hook height & runway: vertical lift available and any required runway for travel
• Power & control: voltage, pendant or radio remote, duty cycle

Mounting options and site considerations

Pedestal (floor) mount

Best for flexible placement and higher duty cycles. Requires concrete footing sized to manufacturer's spec.

Wall-mounted jib

Saves floor space but needs structural wall capacity. Ideal for bays with limited floor area.

Free-standing or rail-mounted

Used where coverage across a bay is needed; may require runway beams or additional supports.

Rent vs Buy: quick decision guide

• Rent: short-term projects, seasonal peaks, trial before purchase, avoids capital spend
• Buy: long-term continuous use, customization, lower cost per year for heavy usage
• Lease: combines regular payments with long-term availability and maintenance options

Selection checklist

1. Confirm maximum load and safety margin.
2. Measure outreach and hook height required on site.
3. Determine mounting type and structural requirements.
4. Choose hoist type and controls (manual vs electric).
5. Verify duty cycle and local service support availability.

Practical tips

• Always review the crane’s load chart; do not exceed rated capacity for any outreach.
• Inspect anchor bolts and foundation before commissioning a pedestal-mounted unit.
• Use an electric chain hoist for frequent lifts to improve speed and reduce operator fatigue.
• Schedule periodic inspections and lubrication as recommended by the manufacturer.
• If renting, confirm delivery, setup, and on-site operator training are included.

Safety & maintenance essentials

Safe operation of a 2 ton jib crane depends on correct installation, regular inspection, and trained operators. Follow these standards:

• Conduct pre-shift visual checks (wires, hooks, limit switches).
• Follow rated load and tag inspection intervals.
• Ensure emergency stop and overload protection are functional.
• Keep load paths clear and use tag lines for load control where needed.

FAQ

Conclusion & next steps

Choosing the right 2 ton jib crane means matching capacity, outreach, and mounting to your job while following safety and inspection rules. For rentals, Lift Group provides flexible terms, delivery, and operator support to get your lift done safely.

Contact Lift Group today to compare models, get site-specific recommendations, and request a fast quote for a 2 ton jib crane rental or purchase.

2 ton jib crane